BSoDs usually give out a code that can help you troubleshoot the root cause of the problem. Once such error code is “DPC WATCHDOG VIOLATION.” This BSoD error can particularly be annoying as it does not allow you to proceed and boot into Windows. Even if you are able to boot, this BSoD will likely occur again and again, until the problem is removed. In this article, we show you the many ways you can fix the “DPC WATCHDOG VIOLATION” BSoD and continue with your work.

What is the DPC Watchdog Violation BSoD

DPC stands for “Deferred Procedure Call.” DPC is a Windows feature that handles interruptions within the OS. Whereas the Watchdog is the bug checker which constantly communicates with the different system components to check up on them, and ensures that they are working normally. When the Watchdog timer does not receive a reply from a component and is unable to communicate with it, it throws a BSoD in an attempt to save the computer from any harm that may result from the gap in the communication.

What Causes the DPC Watchdog Violation BSoD

The “DPC Watchdog Violation” error can occur due to different reasons. These include the following:

A driver on your PC is outdated or corrupted.There is incompatible hardware or software on your PC.There is a conflict between two applications.Critical system files are corrupted or damaged.

Due to any one of these reasons, you can encounter the “DPC WATCHDOG VIOLATION” BSoD. Moreover, the BSoD can occur under different circumstances. For example, it can happen when attempting to transfer data over the internet or connecting to Wi-Fi. Regardless of your situation, continue to perform the given solutions below and resolve the issue.

Fix “DPC WATCHDOG VIOLATION” BSoD

Perform the solutions below in the given chronological order, which moves from a less-aggressive approach to a more-aggressive approach toward resolving the BSoD.

Disconnect External Peripherals

It may be possible that your newly-attached keyboard or any other peripheral may be the culprit of the BSoD. Any hardware incompatibility issues can immediately result in the BSoD error code “DPC WATCHDOG VIOLATION.” We recommend that you disconnect all connected hardware and device, and then check if you still encounter the BSoD. If you don’t, this means that the issue was with a hardware device. To pinpoint which hardware was problematic, you can connect them one by one and the device which throws the same BSoD is your villain.

Run Program Compatibility Troubleshooter

Both Windows 10 and 11 come with preinstalled troubleshooters that automatically scan and troubleshoot the different components of your PC. Run the “Program Compatibility Troubleshooter” to try and rectify the issue with any recently-installed apps so that you do not encounter a “DPC WATCHDOG VIOLATION” BSoD because of it. Follow these steps to run the troubleshooter: When the changes are applied, check to see if you still encounter the “DPC WATCHDOG VIOLATION” BSoD. The troubleshooting wizard will now launch. Select the application to troubleshoot and then click Next. If the wizard was able to make any changes to the problematic app, click “Yes, save these settings for this program.” If the problem persists, try troubleshooting any other app which was recently installed.

Uninstall Recently-Installed Apps and Programs

If the BSoD was experienced after an app installation, and troubleshooting it did not resolve the error, then try to uninstall the app entirely. If there are compatibility issues with the app, then removing it should surely fix the problem. Follow these steps to uninstall an app or program: Once the app is removed, check to see if you still experience the BSoD. If the error remains, proceed forward with the given solutions below. It is likely that the uninstallation wizard will now launch.

Run the CHKDSK Utility

CHKDSK is a command-line utility that scans your hard drives for damaged system files, and bad sectors and attempts to repair them. If it fails to repair any discovered bad sectors, it informs the operating system not to use them. Either way, it makes the hard drive usable again, if the “DPC WATCHDOG VIOLATION” BSoD occurred because of bad sectors in the first place. Once the CHKDSK utility has successfully been executed, check to see if the issue remains. If it does, apply the following fix. Once it reboots, the Check Disk utility will run and scan your hard drive. This can take a while, in some cases, hours. Let the scan finish and reboot into Windows.

Fix Corrupted Files with DISM and SFC

Deployment Image Servicing and Management (DISM) and System File Checker (SFC) are built-in tools in Windows that can scan and repair system files. Use the following steps to run the DISM and SFC scans in an attempt to repair the critical system files: Once the scans are complete, use your computer for a while and check if the BSoD repeats itself. If the error remains, there are still a few things you can do to mitigate it.

Update Hard Drive’s Firmware

As we mentioned earlier, the driver running your SSD/ hard drive can be outdated or malfunctioning, resulting in a “DPC WATCHDOG VIOLATION” BSoD. Follow these steps to update the drive’s firmware automatically: If the wizard was unable to install the latest driver, you can try installing it manually. However, if the latest driver is already available, you can try and reinstall the current driver. The update driver wizard will now open. The wizard will now search the web and download and install the latest available driver (if one is available). Once the driver has been updated, check if the problem persists. If it does, then you must also change the AHCI controller firmware.

Change SATA AHCI Controller

The AHCI controller controls the data transfer protocol between the motherboard and the storage drive. If you have a controller installed from the manufacturer (IaStorAC.Sys), try changing to the one from Microsoft (Storahci.Sys). Follow these steps to change the SATA AHCI controller to Storahci.Sys: When the computer restarts, check to see if the efforts bare any fruit. If the BSoD is still experienced, then continue forward with the given solutions below. The Driver Update wizard will now open. You will now be prompted that the new driver has been installed.

Scan Computer for Malware

A virus may be infecting your PC and affecting how it behaves, resulting in a “DPC WATCHDOG VIOLATION” BSoD. If so, you must run a deep malware scan of your PC and remove/quarantine any anomalies. Use the built-in Windows Security Antivirus (formerly Windows Defender) to scan your computer for malware. Here is how to do it: You can also perform a scan using a third-party antivirus. Here is a list of the top antivirus software to use to perform the scan. If you are proceeding to purchase antivirus software, here are the 17 aspects you should always consider. Once a virus is detected and removed/quarantined, check to see if the BSoD has been mitigated.

Install Pending Windows Updates

Windows updates often include system files that are overwritten on the existing system files. It may be possible that any corrupted system files are automatically replaced during the update process, fixing the “DPC WATCHDOG VIOLATION” error. Follow these steps to check for updates on a Windows PC:

Check Event Viewer

If none of the solutions have worked for you so far, then we suggest that you refer to the Event Viewer. The Event Viewer isn’t a solution but should give solid guidance on what caused the error in the first place. Using that information, you can search for a solution online. The app will now begin searching the web for updates. If you do not understand an error, you can simply Google the “Event ID” for more information on it and troubleshoot it.

Restore PC to Earlier State

Restoring a PC refers to taking your Windows to a state it was earlier captured. It means all system configuration, network settings, and files and folders will revert to a point in time as if nothing ever happened after that. Of course, there needs to be a restore point in the history of the PC to revert it to. This can be enabled by using Backup & Restore. If you have already created a restore point in the past that you can revert to, follow these steps: This should take your PC back to when the restore point was created. If the “DPC WATCHDOG VIOLATION” BSoD issue did not exist back then, then it should be resolved. The System Restore wizard will now open. Windows will now restore to a previous restore point. This step can take some time to complete. Do not reboot or turn off your computer during this point and wait for the restoration to complete. At this point, we suggest that you do not perform the same tasks which lead to the BSoD in the first place. If the BSoD still persists, then the only thing left to do now is reset the computer.

Reset Windows

Resetting the computer brings all configurations back to their factory default settings and values. If the solutions discussed above did not work for you, then you must now reset your PC. Here is how: The operating system will now reset. This phase can take a while and the computer will then restart. When it does, check to see if you still experience the “DPC WATCHDOG VIOLATION” BSoD. The reset wizard will now open.

Closing Thoughts

The “DPC WATCHDOG VIOLATION” error code occurs when the Watchdog timer doesn’t receive a reply from a component within 100ms, which overwhelms it, resulting in a BSoD. But the solutions provided in this post will surely help mitigate the root cause and get your PC to work normally again. However, in case you are still experiencing the same problem, then the only solution might be to perform a clean Windows installation as we have already tried pretty much everything else at this point. Also see:

How To Fix Watchdog.Sys BSoD In Windows 11/10How To Fix Windows Error 0xC000021A (Blue Screen of Death Stop Code)How To Fix “Driver Power State Failure” BSoD In Windows 10/11How to Fix Bad System Config Info BSoD in Windows 10How to Fix “System Thread Exception Not Handled” BSoD on Windows 10